{"title":"MCU Tools","description":"","products":[{"product_id":"10-pcs-infrared-smart-car-obstacle-avoidance-sensor-photoelectric-switch-robot-sensor-6d9","title":"10 PCS Infrared Smart Car Obstacle Avoidance Sensor Photoelectric Switch Robot Sensor(  6D9)","description":"\u003cbr\u003e1. The sensor module has strong adaptability to ambient light. It has a pair of infrared emitting and receiving tubes. The emitting tube emits a certain frequency of infrared rays. When the detection direction encounters an obstacle (reflecting surface), the infrared rays are reflected back by the receiving tube After receiving and processing by the comparator circuit, the green indicator light will light up, and the signal output interface will output a digital signal (a low-level signal). The detection distance can be adjusted by the potentiometer knob. The effective distance range is 2-30cm, and the working voltage is 3.3. V-5V.\u003cbr\u003e2. The detection distance of the sensor can be adjusted by a potentiometer, which has the characteristics of low interference, easy assembly, and convenient use.\u003cbr\u003e3. Widely used in many occasions such as robot obstacle avoidance, obstacle avoidance trolley, assembly line counting and black and white line tracking.\u003cbr\u003e4. The output port OUT of the sensor module can be directly connected to the IO port of the single-chip microcomputer, or it can directly drive a 5V relay; connection mode: VCC-VCC; GND-GND; OUT-IO\u003cbr\u003e5. The comparator adopts LM393, which works stably;\u003cbr\u003e6. The module can be powered by 3-5V DC power supply. When the power is turned on, the red power indicator lights up;\u003cbr\u003e7. With 3mm screw hole, easy to fix and install;\u003cbr\u003e8. Circuit board size: 3.2CM x 1.4CM\u003cbr\u003e9. Module interface description\u003cbr\u003e-VCC external 3.3V-5V voltage (can be directly connected with 5v single-chip microcomputer and 3.3v single-chip microcomputer)\u003cbr\u003e-GND External GND\u003cbr\u003e-OUT small board digital output interface (0 and 1)\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061046640887,"sku":"TBD0596643901A","price":13.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD0596643901A.jpg?v=1658928810"},{"product_id":"hw-539-gps-module-ne0-7m-satellite-positioning-module-51-scm-mcu-for-arduinohw-539-7m-gps","title":"HW-539 GPS Module NE0-7M Satellite Positioning Module 51 SCM MCU for Arduino(HW-539 7M GPS)","description":"\u003cbr\u003e1. Get 51 Arduino STM32 microcontroller routine.\u003cbr\u003e2. With a USB interface, you can watch the computer positioning effect directly phone line.\u003cbr\u003e3. With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.\u003cbr\u003e4. With SMA interface can be directly connected to an active antenna SMA.\u003cbr\u003e5. TTL level, compatible with 3.3V\/5V systems.(Size: 39 x 25.5mm)\u003cbr\u003e6. Frequency: 1575.42MHz\u003cbr\u003e7. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061068824823,"sku":"TBD0572271901A","price":14.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD0572271901A.jpg?v=1658929326"},{"product_id":"hw-019b-mini-usb-mcu-development-board","title":"HW-019B Mini USB MCU Development Board","description":"\u003cbr\u003e1. Applied to touch sensors such as buttons, sliders and wheels\u003cbr\u003e2. Application scenarios: car control panels, LCD TVs and monitors, notebook computers, mobile phones, etc.\u003cbr\u003e3. The single-chip microcomputer integrates Atmels AVR microcontroller, and includes 1KB to 4KB of flash memory, with 32 KB to 256 KB of SRAM\u003cbr\u003e4. The device supports SPI and TWI (I2C-compatible) communication, providing high flexibility and working voltage from 1.8V to 5.5V\u003cbr\u003e5. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used\u003cbr\u003e6. Size: 24x18mm\u003cbr\u003e7. Model: ATTINY85 MICRO blue board\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061073215735,"sku":"TBD05722578","price":11.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05722578.jpg?v=1658929370"},{"product_id":"hw-243-w5500-ethernet-network-module-hardware-tcp-ip-51-stm32-single-chip-program","title":"HW-243 W5500 Ethernet Network Module Hardware TCP \/ IP 51 \/ STM32 Single-Chip Program","description":"\u003cbr\u003e1. No need to write Ethernet underlying code to implement TCP\/IP protocol stack\u003cbr\u003e2. Support sleep mode and wake-up on LAN, internal integrated 32K bytes on-chip buffer for Ethernet packet processing\u003cbr\u003e3. Support 10\/100MBPS transfer rate\u003cbr\u003e4. Support 8 independent ports working at the same time\u003cbr\u003e5. The module supports 5V or 3. 3V power supply, which is convenient for users to use in different SCM systems\u003cbr\u003e6. The communication method between the module and the microcontroller is SPI protocol, which supports speeds up to 80MHz\u003cbr\u003e7. If you use the 5500 Ethernet module, you only need some simple Socket programming to realize the Ethernet application\u003cbr\u003e8. Support protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE\u003cbr\u003e9. We provide users with the source code of the routines based on the 51 single-chip microcomputer and ISTM32 single-chip microcomputer in the \"client\", \"server\" and \"UDP\" three working modes, as well as a detailed manual\u003cbr\u003e10. Chip model: W5500\u003cbr\u003e11. Input voltage: 3.3-5v\u003cbr\u003e12. Size: about 55 x 28mm\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061074297079,"sku":"TBD05722754","price":13.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05722754.jpg?v=1658929392"},{"product_id":"hw-205-rdm6300-125khz-serial-port-reading-rfid-card-modulemodule","title":"HW-205 RDM6300 125kHz Serial Port Reading RFID Card Module(Module)","description":"\u003cbr\u003e1. Interface: TTL level RS232 format\u003cbr\u003e2. Purpose: experiment\u003cbr\u003e3. Card reading distance: below 5CM\u003cbr\u003e4. Application: smart home\u003cbr\u003e5. Weight: about 10g\u003cbr\u003e6. Coil inductance: 47~68uH\u003cbr\u003e7. Frequency: 125KHz\u003cbr\u003e8. Working voltage: DC 5V\u003cbr\u003e9. Working current: less than 50 mA\u003cbr\u003e10. Working temperature: -10 to 70 degrees Celsius\u003cbr\u003e11. Storage temperature: -20 to 80 degrees Celsius\u003cbr\u003e12. Coil size: 46x32x3mm\u003cbr\u003e13. Module size: 38.5x19x9mm\u003cbr\u003e\u003cbr\u003e","brand":"buy2fix","offers":[{"title":"Default Title","offer_id":43061074985207,"sku":"TBD0572172301A","price":10.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD0572172301A.jpg?v=1658929452"},{"product_id":"qfn44-0-5-flip-shrapnel-burn-socket-test-socket-programmer","title":"QFN44-0.5 Flip Shrapnel Burn Socket Test Socket Programmer","description":"\u003cbr\u003e1. Number of cores: 44\u003cbr\u003e2. Features: U-shaped thimble, more stable contact\u003cbr\u003e3. Purpose: Programming socket, test socket, test, read and write on QFN44 IC chip\u003cbr\u003e4. Working frequency: High frequency\u003cbr\u003e5. Production process: Injection molding\u003cbr\u003e6. Application: Integrated Circuit IC\u003cbr\u003e7. Contact material: Beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PPS\/PET\u003cbr\u003e9. Chip size: 7x7cm\u003cbr\u003e10. Pin spacing: 0.5mm\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061076590839,"sku":"TBD05546852","price":63.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05546852.jpg?v=1658929501"},{"product_id":"ssop20-tssop20-ots-28-0-65-01-chip-gold-plated-dual-contact-pin-adapter-socket","title":"SSOP20 TSSOP20 OTS-28-0.65-01 Chip Gold-Plated Dual Contact Pin Adapter Socket","description":"\u003cbr\u003e1. Type: Test Block\u003cbr\u003e2. Working frequency: High frequency\u003cbr\u003e3. Application: Integrated Circuit IC\u003cbr\u003e4. Contact impedance: Less than 25 milliohms\u003cbr\u003e5. Production process: Injection molding\u003cbr\u003e6. Features: Fire retardant\/flame retardant\u003cbr\u003e7. Contact material: Beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PEI, PPS\u003cbr\u003e9. Number of cores: 20\u003cbr\u003e10. Working temperature: -65～155 degrees Celsius\u003cbr\u003e11. Lead spacing: 0.65mm\u003cbr\u003e12. Service life: 20,000 times\u003cbr\u003e13. Adaptation chip body width: 4.4mm\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. Using double contact technology, the contact is more stable\u003cbr\u003e2. The seat shell is made of special engineering plastic, which has high strength and long life.\u003cbr\u003e3. The shrapnel adopts imported beryllium copper material, which has low impedance and good elasticity\u003cbr\u003e4. Thick gold plating layer, thick contact plating, ultra-low contact impedance, high reliability\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061077278967,"sku":"TBD05546855","price":18.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05546855.jpg?v=1658929520"},{"product_id":"large-and-small-sd-card-gold-point-to-dip48-double-headed-needle-test-seat","title":"Large And Small SD Card Gold Point To DIP48 Double-Headed Needle Test Seat","description":"\u003cbr\u003ePerformance Parameters:\u003cbr\u003e1. Working frequency: low frequency\u003cbr\u003e2. Application range: integrated circuit IC\u003cbr\u003e3. Interface type: probe\u003cbr\u003e4. Probe material: beryllium copper (standard)\u003cbr\u003e5. Insulation material: FR-4, PPS, etc.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. It adopts manual flip structure, which is easy to operate;\u003cbr\u003e2. The product has a high degree of universality. As long as the limit frame is changed, all SD cards with the same pins and different dimensions can be tested;\u003cbr\u003e3. The pressure plate of the upper cover adopts a special structure, and the downward pressure is stable to ensure that the pressure of the SD card is uniform and does not shift;\u003cbr\u003e4. The high-precision positioning slot ensures accurate positioning of the SD card and high production efficiency;\u003cbr\u003e5. Equipped with different main detection boards, can realize the interchangeability of Chipsbank, UT165, Anguo, SMI, NETWORK solutions\u003cbr\u003e6. The probe can be replaced, the maintenance is convenient, and the cost is low;\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061080391927,"sku":"TBD05543850","price":108.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05543850.jpg?v=1658929526"},{"product_id":"qfp48-0-5-qfp48-to-dip48-burning-seat-test-seat-programming-seat","title":"QFP48-0.5 QFP48 To DIP48 Burning Seat Test Seat Programming Seat","description":"\u003cbr\u003e1. Product use: Programming socket, test socket, programming and testing of QFP48 IC chips\u003cbr\u003e2. Applicable packages: QFP48, PQFP48, QFP48, pin pitch 0.5 mm\u003cbr\u003e3. Features: All pins are led out in the order of the chip\u003cbr\u003e4. Pin spacing: 0.5 mm\u003cbr\u003e5. Foot position: 48\u003cbr\u003e6. Chip size: 7x7 mm (with pins 9x9 mm)\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061080686839,"sku":"TBD05541244","price":39.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05541244.jpg?v=1658929533"},{"product_id":"emmc153-emmc169-flip-shrapnel-to-sd-interface-test-socket-burning-socket-for-data-recovery-mobile-phone-repair","title":"EMMC153 EMMC169 Flip Shrapnel To SD Interface Test Socket Burning Socket for Data Recovery Mobile Phone Repair","description":"\u003cbr\u003e1. Type: Test block\u003cbr\u003e2. Interface type: SD\u003cbr\u003e3. Application: Integrated circuit IC\u003cbr\u003e4. Test method:\u003cbr\u003eA. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction\u003cbr\u003eB. Insert the SD interface into the card reader and then connect to the computer, select the corresponding test program\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. SOCKET is compatible with the ball and no ball test, and the IC limit frame can be replaced. Compared with similar products, it has a long service life and wide versatility.\u003cbr\u003e2. Compatible with 169-FBGA 153-FBGA at the same time\u003cbr\u003e3. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head shape is imitated by the probe design, and the latter is hardened and thickened with gold plating to ensure product stability and durability\u003cbr\u003e4. The contact module adopts an overall structure to reduce the problem of repeated positioning, ensure that its contact point is accurately aligned with the IC PAD, and has a high pass rate in one test\u003cbr\u003e5. Use welding structure to ensure good contact and stable testing\u003cbr\u003e6. Flip cover structure, more convenient for manual testing, convenient and simple operation\u003cbr\u003e7. The pressure IC adopts a mold integral molding and a spring self-adaptive structure to ensure that ICs of different thicknesses do not need any adjustments to have good contact. The tested ICs are versatile (the thickness range of 0.6-2.0MM can be tested)\u003cbr\u003e8. The structure adopts injection molding, precise positioning, convenient access to IC, and higher work efficiency\u003cbr\u003e\u003cbr\u003eRepair and maintenance:\u003cbr\u003e1. Use an air gun or anti-static brush to remove impurities in the SOCKET seat to make it contact well;\u003cbr\u003e2. Clean the SOCKET with absolute alcohol to clean the attached impurities on the top of the shrapnel and make it contact well;\u003cbr\u003e3. If you find that the shrapnel inside the SOCKET is burned or broken, please purchase the corresponding SOCKET to replace it;\u003cbr\u003e4. It cannot be detected when the USB interface is plugged in. Please check whether the power switch is turned on or whether the computer USB connection is normal;\u003cbr\u003e5. It is strictly forbidden to soak and clean with organic solvents such as thinner water and board washing water to avoid damage to the internal structure of SOCKET;\u003cbr\u003e6. When not in use for a long time, please seal it with an anti-static bag to prevent dust from falling in and affect the product test performance.\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061081211127,"sku":"TBD05519928","price":85.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05519928.jpg?v=1658929540"},{"product_id":"emcp162-168-flip-shrapnel-to-usb-test-socket-emcp-programming-socket-mobile-phone-font-read-write-socket","title":"EMCP162\/168 Flip Shrapnel To USB Test Socket EMCP Programming Socket Mobile Phone Font Read-Write Socket","description":"\u003cbr\u003e1. Type: test block\u003cbr\u003e2. Working frequency: high frequency\u003cbr\u003e3. Application: integrated circuit IC\u003cbr\u003e4. Interface type: terminal\u003cbr\u003e5. Production process: injection molding\u003cbr\u003e6. Features: stable testing\u003cbr\u003e7. Contact material: beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PET\u003cbr\u003e9. Number of cores: 17\u003cbr\u003e10. Purpose: programming socket, test socket, for testing, reading and writing of EMCP IC chips\u003cbr\u003e11. Lead spacing: 0.5mm\u003cbr\u003e12. Service life: 100,000 times\u003cbr\u003e\u003cbr\u003eTesting method:\u003cbr\u003e1. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction\u003cbr\u003e2. Plug the USB cable into the USB port of the computer, turn on the power switch of the socket, and select the corresponding test program\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. Also compatible with 186-FBGA 162-FBGA\u003cbr\u003e2. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head-shaped probe is designed to be hardened and thickened in the later stage to ensure product stability and durability.\u003cbr\u003e3. Support hot plugging and separate power switch, support for testing through the USB interface or through the connection with the board on the board corresponding to the PIN\u003cbr\u003e4. Using floating board structure, precise positioning, convenient IC picking and placement, higher work efficiency\u003cbr\u003e5. The test board is welded to the adapter board, the test socket does not need to be soldered, and the pinholes are inserted into the adapter board\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061081374967,"sku":"TBD05517577","price":108.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05517577.jpg?v=1658929545"},{"product_id":"emcp221-flip-shrapnel-to-usb-test-socket-burn-socket","title":"EMCP221 Flip Shrapnel To USB Test Socket Burn Socket","description":"\u003cbr\u003e1. Type: Test block\u003cbr\u003e2. Working frequency: High frequency\u003cbr\u003e3. Application: integrated circuit IC\u003cbr\u003e4. Interface type: Terminal\u003cbr\u003e5. Production process: Injection molding\u003cbr\u003e6. Features: Stable testing\u003cbr\u003e7. Contact material: Beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PET\u003cbr\u003e9. Number of cores: 38\u003cbr\u003e10. Purpose: Programming socket, test socket, to test, read and write the IC chip of EMCP221\u003cbr\u003e11. Lead spacing: 0.5mm\u003cbr\u003e12. Service life: 100,000 times\u003cbr\u003e13. Chip size: 11.5x13cm\u003cbr\u003e\u003cbr\u003eTesting Method:\u003cbr\u003e1. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction\u003cbr\u003e2. Plug the USB cable into the USB port of the computer, turn on the power switch of the socket, and select the corresponding test program\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. Also compatible with 186-FBGA 162-FBGA\u003cbr\u003e2. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head-shaped probe is designed to be hardened and thickened in the later stage to ensure product stability and durability.\u003cbr\u003e3. Support hot plugging and separate power switch, support for testing through USB interface or connection with the board on the board according to the PIN\u003cbr\u003e4. Using floating board structure, precise positioning, convenient IC picking and placement, higher work efficiency\u003cbr\u003e5. The test board is welded to the adapter board, the test socket does not need to be soldered, and the pinholes are inserted into the adapter board\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061081669879,"sku":"TBD05517572","price":111.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05517572.jpg?v=1658929557"},{"product_id":"qfn32-0-5-burning-seat-chip-test-seat-flip-shrapnel-double-layer-board-programming-seat","title":"QFN32-0.5 Burning Seat Chip Test Seat Flip Shrapnel Double-Layer Board Programming Seat","description":"\u003cbr\u003e1. Working frequency: high frequency\u003cbr\u003e2. Application range: integrated circuit IC\u003cbr\u003e3. Production process: injection molding\u003cbr\u003e4. Contact material: beryllium copper shrapnel\u003cbr\u003e5. Insulator material: PPS PET\u003cbr\u003e6. Number of cores: 32\u003cbr\u003e7. Name: QFN32 flip shrapnel to 152 test seat\u003cbr\u003e8. Purpose: programming socket and test socket, to program and test QFN32 IC chips\u003cbr\u003e9. Chip size: 5x5cm\u003cbr\u003e10. Pin spacing: 0.5mm\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061081833719,"sku":"TBD05508777","price":54.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05508777.jpg?v=1658929563"},{"product_id":"waveshare-10-3-inch-1872x1404-flexible-e-ink-display-hat-for-raspberry-pi","title":"Waveshare 10.3 inch 1872x1404 Flexible E-Ink Display HAT for Raspberry Pi","description":"Overview\u003cbr\u003e1. This is a flexible E-Ink display HAT for Raspberry Pi, 10.3inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB\/SPI\/I80\/I2C interface, supports partial refresh.\u003cbr\u003e2. Compared with normal e-Paper panels, this flexible panel allows bending without being damaged, and its thinner and lighter.\u003cbr\u003e3. Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1. Flexible e-Paper, the display section is bendable (DONT bend the FPC section)\u003cbr\u003e2. No backlight, keeps displaying last content for a long time even when power down\u003cbr\u003e3. Low power consumption, basically power is only required for refreshing\u003cbr\u003e4.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003cbr\u003e5. USB\/SPI\/I80\/I2C interface, for connecting with host boards like Raspberry Pi\/Nucleo, etc.\u003cbr\u003e6. Comes with development resources and manual (examples for Raspberry Pi\/STM32)\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e1. Operating voltage: 5V\u003cbr\u003e2. Interface: USB\/SPI\/I80\/I2C\u003cbr\u003e3. Outline dimension:  227.7mm x 165.8mm x 0.647mm\u003cbr\u003e4. Display size: 209.664mm x 157.248mm\u003cbr\u003e5. Dot pitch: 0.112mm x 0.112mm\u003cbr\u003e6. Resolution: 1872 x 1404\u003cbr\u003e7. Display color: Black, white\u003cbr\u003e8. Gray scale: 2-16 (1-4 bit)\u003cbr\u003e9. Full refresh time: 450ms\u003cbr\u003e10. Total refresh power: 1.2W(typ.)\u003cbr\u003e11. Total standby power: 0.1W(typ.)\u003cbr\u003e12. Viewing angle: \u0026gt;170 degree\u003cbr\u003e13. Weight: 77g\u003cbr\u003e\u003cbr\u003ePacking List\u003cbr\u003e1. 10.3inch e-Paper (D) x1\u003cbr\u003e2. e-Paper IT8951 Driver HAT (B) x1\u003cbr\u003e3. 10.3inch e-Paper Adapter x1\u003cbr\u003e4. 33PIN FFC (same side contact) x1\u003cbr\u003e5. USB type A plug to micro B plug cable x2\u003cbr\u003e6. PH2.0 20cm 8Pin x1\u003cbr\u003e7. RPi screws pack (2pcs) x1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061083963639,"sku":"ZY23045193","price":244.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY23045193.jpg?v=1658929632"},{"product_id":"waveshare-stm8-qfp48-programmer-adapter","title":"Waveshare STM8-QFP48, Programmer Adapter","description":"Yamaichi IC Test \u0026amp; Burn-in Socket with a simple board, especially for STM8 microcontroller in QFP48(0.5mm pitch) package\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1. 4-pin SWIM Port for programming or testing\u003cbr\u003e2. External crystal can be connected via on board socket\u003cbr\u003e3. All the MCU pins are accessible on expansion connectors\u003cbr\u003e\u003cbr\u003eSupported Devices\u003cbr\u003eSTM8 microcontroller in QFP48(0.5mm pitch) package with compatible pinouts\u003cbr\u003e- STM8S105CxTx \/ STM8S207CxTx \/ STM8S208CxTx\u003cbr\u003e- STM8AF51x8T \/ STM8AF52x8T \/ STM8AF61x8T \/ STM8AF62x8T\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. STM8-QFP48 × 1\u003cbr\u003e2. USB power cable × 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061134131447,"sku":"ZY14348228","price":58.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14348228.jpg?v=1658930436"},{"product_id":"st-link-v2-mini-stm-programmers-debuggers","title":"ST-LINK\/V2 (mini), STM Programmers \u0026 Debuggers","description":"\u003cb\u003eDescription\u003cbr\u003e\u003c\/b\u003eMini ST-LINK\/V2 on a small single board, an extreme low cost solution for in-circuit debugger\/programmer for STM8 and STM32.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003cbr\u003e\u003c\/b\u003e1. Onboard 500mA self-recovery fuse to avoid harming by short circuit\u003cbr\u003e2. Dual voltage output (3.3V\/5V), easy for debugging\/programming\u003cbr\u003e3. Standard USB interface for direct connection to PC\u003cbr\u003e4. Debugging\/Programing performance\u003cbr\u003e- Debugging : run at full-speed, single-stepped, breakpoints, viewing variables and registers, etc.\u003cbr\u003e- Programming : supports FLASH ROM, EEPROM, AFR, etc.\u003cbr\u003e- USB2.0 combined with SWIM\/SWD interfaces : quick response for debugging \u0026amp; fast speed for programming\u003cbr\u003e5. Upgradable firmware\u003cbr\u003e- The firmware is upgradable to support more devices in the future\u003cbr\u003e- Automatically upgraded\u003cbr\u003e6. Supported software\u003cbr\u003e- ST-LINK Utility v2.0 (or higher ver.)\u003cbr\u003e- STVD Version 4.2.1 (or higher ver.)\u003cbr\u003e- STVP Version 3.2.3 (or higher ver.)\u003cbr\u003e- IAR EWARM Revision v6.20 (or higher ver.)\u003cbr\u003e- IAR EWSTM8 Revision v1.30 (or higher ver.)\u003cbr\u003e- KEIL RVMDK Revision v4.21 (or higher ver.)\u003cbr\u003e- ATOLLIC\u003cbr\u003e- TASKING\u003cbr\u003e7. Supported devices\u003cbr\u003e- All the STM8 devices with SWIM interface\u003cbr\u003e- All the STM32 devices with SWD interface\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Contents\u003cbr\u003e\u003c\/b\u003e1. ST-LINK\/V2 (mini) × 1\u003cbr\u003e2. 4-pin  custom connector cable × 1\u003cbr\u003e3. USB type A plug to receptacle cable × 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061134229751,"sku":"ZY14348195","price":16.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14348195.jpg?v=1658930440"},{"product_id":"waveshare-open8s208q80-standard-stm8-development-board","title":"Waveshare Open8S208Q80 Standard, STM8 Development Board","description":"\u003cb\u003eOverview\u003cbr\u003e\u003c\/b\u003eOpen8S208Q80 is a STM8 development board that features a STM8S208MB device as the microcontroller. It supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM8 microcontroller.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat\u003c\/b\u003e i\u003cb\u003es On Board\u003cbr\u003e\u003c\/b\u003e1. STM8S208MB:the high performance STM8 MCU which features:\u003cbr\u003e- Core: 8-bit\u003cbr\u003e- Operating Frequency: 24 MHz(20 MIPS) Max\u003cbr\u003e- Operating Voltage: 2.7-5.5V\u003cbr\u003e- Package: LQFP80\u003cbr\u003e- I\/Os: 68\u003cbr\u003e- Memories: 128kB Flash, 6kB SRAM, 2kB EEPROM\u003cbr\u003e- Communication Interfaces: 1 x SPI, 1 x I2C, 2 x UART, 1 x CAN, 12 x PWM, 16 x ADC\u003cbr\u003e- Debugging\/Programming: SWIM\u003cbr\u003e2. AMS1117-3.3: 3.3V voltage regulator\u003cbr\u003e3. Power switch\u003cbr\u003e4. Power indicator\u003cbr\u003e5. LEDs: Convenient for indicating I\/O status and\/or program running state\u003cbr\u003e6. Reset button\u003cbr\u003e7. User keys: For I\/O input test and\/or program control\u003cbr\u003e8. Joystick: Five positions\u003cbr\u003e9. 8M crystal oscillator\u003cbr\u003e10. Adjustable resistor: For LCD12864 contrast adjustment\u003cbr\u003e11. UART1 interface: For connecting UART peripherals, such as RS232, RS485, USB TO UART, etc.\u003cbr\u003e12. CAN interface: For connecting CAN modules\u003cbr\u003e13. PS\/2 interface: For connecting PS\/2 devices, such as keyboard and\/or mouse\u003cbr\u003e14. SPI interface: For connecting SPI peripherals, such as DataFlash (AT45DBxx), SD card, MP3, etc.\u003cbr\u003e15. 16 I\/Os interface: For connecting accessory boards which using I\/O control, such as FT245 USB FIFO, 8 SEG LED, etc.\u003cbr\u003e16. IC interface: For connecting I2C peripherals, such as I\/O expander (PCF8574), EEPROM (AT24Cxx), etc.\u003cbr\u003e17. UART3 interface: For connecting UART peripherals, such as RS232, RS485, USB TO UART, etc.\u003cbr\u003e18. Graphic multi-color LCD interface: For connecting 2.2 inch multi-color touch screen LCD which using SPI control\u003cbr\u003e19. Graphic dot-matrix LCD interface: For connecting graphic LCDs such as LCD12864\u003cbr\u003e20. 1-WIRE interface: V connecting 1-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.\u003cbr\u003e21. 5V DC jack\u003cbr\u003e22. Custom crystal socket\u003cbr\u003e23. VCC power input\/output: Usually used as power output, also common-grounding with other user board\u003cbr\u003e24. MCU pins connector: All the MCU pins are accessible on expansion connectors for further expansion\u003cbr\u003e25. SWIM interface: For debugging\/programming\u003cbr\u003e26. User keys jumper\u003cbr\u003e27. Joystick jumper\u003cbr\u003e28. 1-WIRE jumper\u003cbr\u003e29. LEDs jumper\u003cbr\u003e30. PS\/2 jumper\u003cbr\u003e31. LCD interface selection jumper\u003cbr\u003e- Short the jumper for dot-matrix LCD\u003cbr\u003e- Open the jumper for multi-color LCD\u003cbr\u003e32. VDD selection jumper\u003cbr\u003e33. Crystal selection jumper\u003cbr\u003e34. VREF selection jumper\u003cbr\u003e35. For jumpers 26-30:\u003cbr\u003e- Short the jumper to connect to I\/Os used in example code;\u003cbr\u003e- Open the jumper to connect to other custom pins via jumper wires.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage  Contents\u003cbr\u003e\u003c\/b\u003e1. Open8S208Q80 development board x 1\u003cbr\u003e2. 4-pin wire x 2\u003cbr\u003e3. 2-pin wire x 2\u003cbr\u003e4. USB power cable x 1\u003cbr\u003e5. User guide CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061134590199,"sku":"ZY14345285","price":32.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14345285.jpg?v=1658930450"},{"product_id":"waveshare-stm8-qfp64-0-5-programmer-adapter","title":"Waveshare STM8-QFP64-0.5, Programmer Adapter","description":"\u003cb\u003eFeatures\u003cbr\u003e\u003c\/b\u003e1. 4-pin SWIM Port for programming or testing\u003cbr\u003e2. External crystal can be connected via on board socket\u003cbr\u003e3. All the MCU pins are accessible on expansion connectors\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSupported Devices\u003cbr\u003e\u003c\/b\u003eSTM8 microcontroller in QFP64(0.5mm pitch) package with compatible pinouts\u003cbr\u003e- STM8S207RxTx \/ STM8S208RxTx\u003cbr\u003e- STM8Ax51x9T \/ STM8Ax52x9T \/ STM8Ax61x9T \/ STM8Ax62x9T\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePhotos\u003cbr\u003e\u003c\/b\u003e1. External crystal socket\u003cbr\u003e- Insert crystal to the holes on two sides, regardless of the middle hole\u003cbr\u003e2. SWIM port\u003cbr\u003e- For programming\/debugging\/testing\u003cbr\u003e- Compatible with ST-LINK, ST-LINK\/V2, etc.\u003cbr\u003e3. Pin headers connected to MCU pins\u003cbr\u003e- Clearly labeled with onboard marks\u003cbr\u003e- Easy for testing and further expansion\u003cbr\u003e4. Power indicator\u003cbr\u003e5. Power input\u003cbr\u003e- DC5V\/3.3V\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage  Contents\u003cbr\u003e\u003c\/b\u003e1. STM8-QFP64-0.5 × 1\u003cbr\u003e2. USB power cable × 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061134754039,"sku":"ZY14345167","price":69.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14345167.jpg?v=1658930456"},{"product_id":"waveshare-st-link-v2-en-stm-programmers-debuggers","title":"Waveshare ST-LINK\/V2 (EN), STM Programmers \u0026 Debuggers","description":"\u003cb\u003eDescription\u003cbr\u003e\u003c\/b\u003e1. The ST-LINK\/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG\/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.\u003cbr\u003e2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.\u003cbr\u003e3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKey Features\u003cbr\u003e\u003c\/b\u003e1. 5V power supplied by a USB connector\u003cbr\u003e2. USB 2.0 full speed compatible interface\u003cbr\u003e3. USB standard A to mini B cable\u003cbr\u003e4. SWIM specific features\u003cbr\u003e5. 1.65 V to 5.5 V application voltage supported on SWIM interface\u003cbr\u003e6. SWIM low-speed and high-speed modes supported\u003cbr\u003e7. SWIM programming speed rate: 9.7 Kbytes\/s in low speed and 12.8 Kbytes\/s in high speed\u003cbr\u003e8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector\u003cbr\u003e9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector\u003cbr\u003e10. JTAG specific features\u003cbr\u003e11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs\u003cbr\u003e12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector\u003cbr\u003e13. Direct firmware update feature supported (DFU)\u003cbr\u003e14. Status LED which blinks during communication with the PC\u003cbr\u003e15. Operating temperature 0 to 50 °C\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplication Example\u003cbr\u003e\u003c\/b\u003eConnecting the PC and STM8\/STM32 application board through ST-LINK\/V2 to establish hardware connection\u003cbr\u003e\u003cbr\u003e\u003cb\u003eConnection with STM8 applications\u003cbr\u003e\u003c\/b\u003eThe ST-LINK\/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:\u003cbr\u003e- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end\u003cbr\u003e- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sides\u003cbr\u003e\u003cbr\u003e\u003cb\u003eConnection with STM32 applications\u003cbr\u003e\u003c\/b\u003eFor STM32 developments the ST-LINK\/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eST-LINK\/V2 Status\u003cbr\u003e\u003c\/b\u003eThe LED labeled COM on top of the ST-LINK\/V2 shows the ST-LINK\/V2 status (whatever the connection type). When the:\u003cbr\u003e1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.\u003cbr\u003e2. LED is RED: communication between ST-LINK\/V2 and the PC is established (end of enumeration).\u003cbr\u003e3. LED is blinking GREEN\/RED: data are being exchanged between the target and the PC.\u003cbr\u003e4. LED is GREEN: the last communication has been successful.\u003cbr\u003e5. LED is ORANGE: ST-LINK\/V2 communication with the target has failed.\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061134786807,"sku":"ZY14344747","price":52.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14344747.jpg?v=1658930463"},{"product_id":"waveshare-nucleo-l476rg-stm32-nucleo-64-development-board","title":"Waveshare NUCLEO-L476RG, STM32 Nucleo-64 Development Board","description":"\u003cb\u003eNUCLEO-L476RG Description\u003cbr\u003e\u003c\/b\u003eThe STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino? connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.\u003cbr\u003e\u003cbr\u003eThe STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK\/V2-1 debugger and programmer.\u003cbr\u003e\u003cbr\u003eThe STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to mbed online resources.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNUCLEO-L476RG Key Features\u003cbr\u003e\u003c\/b\u003eSTM32 microcontroller with LQFP64 package\u003cbr\u003eTwo types of extension resources\u003cbr\u003eArduino Uno Revision 3 connectivity\u003cbr\u003eSTMicroelectronics Morpho extension pin headers for full access to all STM32 I\/Os\u003cbr\u003embed-enabled (http:\/\/mbed.org)\u003cbr\u003eOn-board ST-LINK\/V2-1 debugger\/programmer with SWD connector\u003cbr\u003eselection-mode switch to use the kit as a standalone ST-LINK\/V2-1\u003cbr\u003eFlexible board power supply\u003cbr\u003eUSB VBUS or external source(3.3 V, 5 V, 7 - 12 V)\u003cbr\u003ePower management access point\u003cbr\u003eThree LEDs\u003cbr\u003eUSB communication (LD1), user LED (LD2), power LED (LD3)\u003cbr\u003eTwo push buttons: USER and RESET\u003cbr\u003eUSB re-enumeration capability: three different interfaces supported on USB\u003cbr\u003eVirtual Com port\u003cbr\u003eMass storage\u003cbr\u003eDebug port\u003cbr\u003eSupported by wide choice of Integrated Development Environments (IDEs) including IAR?, Keil?, GCC-based IDEs\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061135704311,"sku":"ZY14201912","price":40.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14201912.jpg?v=1658930527"},{"product_id":"waveshare-xcore407i-stm32f4-core-board","title":"Waveshare XCore407I, STM32F4 Core Board","description":"Overview\u003cbr\u003e1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.\u003cbr\u003e2. Clock circuit, USB power management\u003cbr\u003e3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash\u003cbr\u003e4. Connectors：USB HS (mini \/ type A), USB FS (mini), Ethernet (RJ45)\u003cbr\u003e5. All the idle I\/O ports are accessible on the pin headers\u003cbr\u003e6. 2.0mm pin header pitch, smaller size, easier to integrate into user system\u003cbr\u003e7. Note : please consider the EVK407I, which supports easily programing\/debugging.\u003cbr\u003e\u003cbr\u003eWhat is On Board\u003cbr\u003eSTM32F407IGT6 development board on board resource\u003cbr\u003e\u003cbr\u003e1. STM32F407IGT6: The high performance STM32 MCU which features:\u003cbr\u003e- Core: Cortex-M4 32-bit RISC\u003cbr\u003e- Feature: a full set of single-cycle DSP instructions\u003cbr\u003e- Operating Frequency: 168MHz, 210 DMIPS\/1.25 DMIPS\/MHz\u003cbr\u003e- Operating Voltage: 1.8V-3.6V\u003cbr\u003e- Package: LQFP176\u003cbr\u003e- Memories: 1024kB Flash, 192+4kB SRAM\u003cbr\u003e- MCU communication Interfaces:\u003cbr\u003e-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C\u003cbr\u003e-- 1 x FSMC, 1 x SDIO, 2 x CAN\u003cbr\u003e-- 1 x USB 2.0 high-speed\/full-speed device\/host\/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY\u003cbr\u003e-- 1 x 10\/100 Ethernet MAC\u003cbr\u003e-- 1 x 8 to 14-bit parallel camera interface\u003cbr\u003e- AD \u0026amp; DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)\u003cbr\u003e- Debugging\/Programming: supports JTAG\/SWD (serial wire debug) interfaces, supports IAP\u003cbr\u003e2. MIC2075-2, onboard USB FS power management device\u003cbr\u003e3. AMS1117-3.3, 3.3V voltage regulator\u003cbr\u003e4. K9F1G08U0E, 1G Bit NandFlash\u003cbr\u003e5. DP83848, Ethernet PHY\u003cbr\u003e6. MIC2075-1, onboard USB HS power management device\u003cbr\u003e7. USB3300, USB HS PHY\u003cbr\u003e8. Power supply switch, powered from 5Vin or USB connection\u003cbr\u003e9. Boot mode switch, for configuring BOOT0 pin\u003cbr\u003e10. Power indicator\u003cbr\u003e11. USB FS LED\u003cbr\u003e12. USB HS LED\u003cbr\u003e13. Reset button\u003cbr\u003e14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication\u003cbr\u003e15. 24M crystal, USB3300 clock\u003cbr\u003e16. 50M crystal, DP83848 clock\u003cbr\u003e17. 32.768K crystal, for internal RTC with calibration\u003cbr\u003e18. Ethernet connector\u003cbr\u003e19. USB FS mini connector\u003cbr\u003e20. USB HS mini connector\u003cbr\u003e21. USB HS type A connector\u003cbr\u003e22. MCU pins expander, VCC, GND and all the idle I\/O ports are accessible on expansion connectors for further expansion\u003cbr\u003e23. USB OTG\/HOST jumper\u003cbr\u003e24. VREF\/VBAT jumper\u003cbr\u003e25. Ethernet I\/O selection solder joint\u003cbr\u003e26. USB HS I\/O selection solder joint\u003cbr\u003e27. PDR selection solder joint: 1.8-3.6V, -40～105℃ OR 1.7-3.6V, 0～70℃\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. XCore407I development board x 1\u003cbr\u003e2. USB type A to Mini-B cable x 1\u003cbr\u003e3. Software CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061146026231,"sku":"ZY13988205","price":53.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY13988205.jpg?v=1658930559"},{"product_id":"waveshare-core103v-stm32f1-core-board","title":"Waveshare  Core103V, STM32F1 Core Board","description":"Overview\u003cbr\u003eCore103V is a small STM32 development board that features an STM32F103VET6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F family.\u003cbr\u003e\u003cbr\u003eAs a minimal ready-to-run system, the Core103V integrates USB communication interface, JTAG\/SWD programming\/debugging interface, clock circuit, boot mode selection, and so on.\u003cbr\u003e\u003cbr\u003eFurthermore, pin headers on the backside allow the Core103V to be plugged-in your application board and act as the MCU core circuit in your system. All the I\/O ports are accessible on the pin headers, and the header pitch is designed as 2.54mm.\u003cbr\u003e\u003cbr\u003eWhat is On Board\u003cbr\u003eSTM32F103VET6 development board on board resource\u003cbr\u003e\u003cbr\u003e1. STM32F103VET6: The high performance STM32 MCU which features:\u003cbr\u003e- Core: Cortex-M3 32-bit RISC\u003cbr\u003e- Operating Frequency: 72MHz, 1.25 DMIPS\/MHz\u003cbr\u003e- Operating Voltage: 2-3.6V\u003cbr\u003e- Package: LQFP100\u003cbr\u003e- I\/Os: 80\u003cbr\u003e- Memories: 512kB Flash, 64kB RAM\u003cbr\u003e- MCU communication Interfaces:\u003cbr\u003e-- 3 x SPI, 5 x USART, 2 x I2S, 2 x I2C, 1 x FSMC, 1 x LCD, 1 x SDIO, 1 x USB, 1 x CAN\u003cbr\u003e- AD \u0026amp; DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)\u003cbr\u003e- Debugging\/Programming: supports JTAG\/SWD (serial wire debug) interfaces, supports IAP\u003cbr\u003e2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator\u003cbr\u003e3. Power supply switch, powered from 5Vin or USB connection\u003cbr\u003e4. Boot mode selection, for configuring BOOT0 pin\u003cbr\u003e5. Boot mode selection (on bottom side), for configuring BOOT1 pin\u003cbr\u003e6. Power indicator\u003cbr\u003e7. VBUS LED\u003cbr\u003e8. Reset button\u003cbr\u003e9. 8M crystal oscillator\u003cbr\u003e10. 32.768K crystal (on bottom side), for internal RTC with calibration\u003cbr\u003e11. JTAG\/SWD interface: for debugging\/programming\u003cbr\u003e12. USB connector, used for establishing USB communication between PC and the STM32 development board\u003cbr\u003e13. IO expander (including VCC\/GND), all the I\/O pins are accessible on expansion connectors for further expansion\u003cbr\u003e14. 5V in pinheader, 5V power supply input\u003cbr\u003e15. USB enable jumper\u003cbr\u003e- Short the jumper to enable USB function\u003cbr\u003e- Open the jumper to disable, as well as taking up no I\/O port\u003cbr\u003e16. VBAT selection jumper\u003cbr\u003e- Short the jumper to use system power supply\u003cbr\u003e- Open the jumper to connect the VBAT to external power, such as battery\u003cbr\u003e17. VREF selection jumper\u003cbr\u003e- Short the jumper to connect VREF+\/VREF- to VCC\/GND\u003cbr\u003e- Open the jumper to connect VREF+\/VREF- to other custom pin via jumper wire\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. Core103V development board x 1\u003cbr\u003e2. USB type A to Mini-B cable x 1\u003cbr\u003e3. Software CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061155856631,"sku":"ZY13998327","price":48.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY13998327.jpg?v=1658930580"},{"product_id":"waveshare-open429i-c-package-a-stm32f4-development-board","title":"Waveshare Open429I-C Package A, STM32F4 Development Board","description":"Overview\u003cbr\u003e1. Open429I-C is an STM32 development board designed for the STM32F429IGT6 microcontroller, consists of the mother board and the MCU core board Core429I.\u003cbr\u003e2. The Open429I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.\u003cbr\u003e\u003cbr\u003eWhat has on the mother board\u003cbr\u003e1. MCU core board connector: for easily connecting the Core429I\u003cbr\u003e2. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.\u003cbr\u003e3. DCMI interface: for connecting camera\u003cbr\u003e4. Capacitive touch panel interface: for connecting capacitive touch panel\u003cbr\u003e5. CAN2 interface: for connecting CAN modules\u003cbr\u003e6. CAN1 interface: for connecting CAN modules\u003cbr\u003e7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI\u003cbr\u003e8. ULPI interface: for connecting high-speed USB peripheral (the 9. STM32F429I integrates USB HS controller without any PHY device)\u003cbr\u003e10. LCD interface 1: for connecting 7inch LCD\u003cbr\u003e11. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.\u003cbr\u003e12. LCD interface 2: for connecting 4.3inch LCD\u003cbr\u003e13. I2C2\/I2C3 interface: easily connects to I2C peripherals such as I\/O expander (PCF8574), EEPROM (AT24Cxx), etc.\u003cbr\u003e14. SAI1 interface: for connecting audio modules like UDA1380 module\u003cbr\u003e15. Ethernet interface: for connecting Ethernet modules\u003cbr\u003e16. USB connector: USB to UART via the onboard convertor PL2303\u003cbr\u003eSPI1\/SPI2 interfaces:\u003cbr\u003e- Easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.\u003cbr\u003e- Easily connects to AD\/DA modules (SPI1 features AD\/DA alternative function)\u003cbr\u003e17. I2S2\/I2S3\/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.\u003cbr\u003e18. 8-bit FMC interface: easily connects to peripherals such as NandFlash\u003cbr\u003e19. 5V DC jack\u003cbr\u003e20. 5V\/3.3V power input\/output: usually used as power output, also common-grounding with other user board\u003cbr\u003e21. MCU pins connector: all the MCU I\/O ports are accessible on expansion connectors for further expansion\u003cbr\u003e22. PL2303: USB to UART convertor\u003cbr\u003e23. LEDs: convenient for indicating I\/O status and\/or program running state\u003cbr\u003e24. PL2303 TX-LED \/ RX-LED\u003cbr\u003e25. 12MHz crystal: for PL2303\u003cbr\u003e26. Joystick: five positions\u003cbr\u003e27. WAKE UP button: used as regular button, and\/or wake up the STM32 MCU from sleep\u003cbr\u003e28. USB to UART jumper\u003cbr\u003e29. LED jumper\u003cbr\u003e- Short the jumper to connect to default I\/Os used in example code\u003cbr\u003e- Open the jumper to connect to custom I\/Os via jumper wires\u003cbr\u003e30. Button\/Joystick jumper\u003cbr\u003e- Short the jumper to connect to default I\/Os used in example code\u003cbr\u003e- Open the jumper to connect to custom I\/Os via jumper wires\u003cbr\u003e\u003cbr\u003eThe \"Standard Package\" and \"Accessory Boards Package\" below are included.\u003cbr\u003eStandard Package\u003cbr\u003e1. Open429I-C development board x 1\u003cbr\u003e2. USB type A plug to mini-B plug cable x 1\u003cbr\u003e3. USB type A receptacle to mini-B plug cable x 1\u003cbr\u003e4. 4-pin 2-pin wires pack x 1\u003cbr\u003e5. USB power cable x 1\u003cbr\u003e6. Software CD x 1\u003cbr\u003e\u003cbr\u003eAccessory Boards Package\u003cbr\u003e1. 4.3 inch 480x272 Touch LCD (B) x 1\u003cbr\u003e2. DP83848 Ethernet Board x 1\u003cbr\u003e3. USB3300 USB HS Board x 1\u003cbr\u003e4. NandFlash Board (A) x 1\u003cbr\u003e5. UDA1380 Board x 1\u003cbr\u003e6. Micro SD Storage Board x 1\u003cbr\u003e7. OV2640 Camera Board x 1\u003cbr\u003e8. Ethernet Cable x 1\u003cbr\u003e9. 4.3 inch LCD screws pack x 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061159624951,"sku":"ZY14030147","price":122.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14030147.jpg?v=1658930630"},{"product_id":"waveshare-open429i-c-standard-stm32f4-development-board","title":"Waveshare Open429I-C Standard, STM32F4 Development Board","description":"STM32 development board designed for STM32F429I, features the STM32F429IGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.\u003cbr\u003e\u003cbr\u003eOverview\u003cbr\u003e1. Open429I-C is an STM32 development board designed for the STM32F429IGT6 microcontroller, consists of the mother board and the MCU core board Core429I.\u003cbr\u003e2. The Open429I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.\u003cbr\u003e\u003cbr\u003eWhat has on the mother board\u003cbr\u003e1. MCU core board connector: for easily connecting the Core429I\u003cbr\u003e2. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.\u003cbr\u003e3. DCMI interface: for connecting camera\u003cbr\u003e4. Capacitive touch panel interface: for connecting capacitive touch panel\u003cbr\u003e5. CAN2 interface: for connecting CAN modules\u003cbr\u003e6. CAN1 interface: for connecting CAN modules\u003cbr\u003e7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI\u003cbr\u003e8. ULPI interface: for connecting high-speed USB peripheral (the STM32F429I integrates USB HS controller without any PHY device)\u003cbr\u003e9. LCD interface 1: for connecting 7inch LCD\u003cbr\u003e10. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.\u003cbr\u003e11. LCD interface 2: for connecting 4.3inch LCD\u003cbr\u003e12. I2C2\/I2C3 interface: easily connects to I2C peripherals such as I\/O expander (PCF8574), EEPROM (AT24Cxx), etc.\u003cbr\u003e13. SAI1 interface: for connecting audio modules like UDA1380 module\u003cbr\u003e14. Ethernet interface: for connecting Ethernet modules\u003cbr\u003e15. USB connector: USB to UART via the onboard convertor PL2303\u003cbr\u003e16. SPI1\/SPI2 interfaces:\u003cbr\u003e- Easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.\u003cbr\u003e- Easily connects to AD\/DA modules (SPI1 features AD\/DA alternative function)\u003cbr\u003e17. I2S2\/I2S3\/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.\u003cbr\u003e18. 8-bit FMC interface: easily connects to peripherals such as NandFlash\u003cbr\u003e19. 5V DC jack\u003cbr\u003e20. 5V\/3.3V power input\/output: usually used as power output, also common-grounding with other user board\u003cbr\u003e21. MCU pins connector: all the MCU I\/O ports are accessible on expansion connectors for further expansion\u003cbr\u003e22. PL2303: USB to UART convertor\u003cbr\u003e23. LEDs: convenient for indicating I\/O status and\/or program running state\u003cbr\u003e24. PL2303 TX-LED \/ RX-LED\u003cbr\u003e25. 12MHz crystal: for PL2303\u003cbr\u003e26. Joystick: five positions\u003cbr\u003e27. WAKE UP button: used as regular button, and\/or wake up the STM32 MCU from sleep\u003cbr\u003e28. USB to UART jumper\u003cbr\u003e29. LED jumper\u003cbr\u003e- Short the jumper to connect to default I\/Os used in example code\u003cbr\u003e- Open the jumper to connect to custom I\/Os via jumper wires\u003cbr\u003e30. Button\/Joystick jumper\u003cbr\u003e- Short the jumper to connect to default I\/Os used in example code\u003cbr\u003e- Open the jumper to connect to custom I\/Os via jumper wires\u003cbr\u003e\u003cbr\u003ePackage Contains\u003cbr\u003e1. Open429I-C development board x 1\u003cbr\u003e2. USB type A plug to mini-B plug cable x 1\u003cbr\u003e3. USB type A receptacle to mini-B plug cable x 1\u003cbr\u003e4. 4-pin 2-pin wires pack x 1\u003cbr\u003e5. USB power cable x 1\u003cbr\u003e6. Software CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061159657719,"sku":"ZY14029122","price":85.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY14029122.jpg?v=1658930637"},{"product_id":"waveshare-core405r-stm32f4-core-board","title":"Waveshare Core405R, STM32F4 Core Board","description":"Overview\u003cbr\u003e1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.\u003cbr\u003e2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.\u003cbr\u003e3. All the I\/O ports are accessible on the pin headers\u003cbr\u003e4. JTAG\/SWD programming\/debugging interface\u003cbr\u003e5. 2.54mm header pitch, allowed to be plugged-in your application board\u003cbr\u003e\u003cbr\u003eWhat has On Board\u003cbr\u003e1. STM32F405RGT6: The high performance STM32 MCU which features:\u003cbr\u003e- Core: Cortex-M4 32-bit RISC\u003cbr\u003e- Operating Frequency: 168MHz, 210 DMIPS\/1.25 DMIPS\/MHz\u003cbr\u003e- Operating Voltage: 1.8V-3.6V\u003cbr\u003e- Package: LQFP64\u003cbr\u003e- Memories: 1MB Flash, 192+4kB SRAM\u003cbr\u003e- MCU communication Interfaces:\u003cbr\u003e-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN\u003cbr\u003e--1 x USB 2.0 HS\/FS device\/host\/OTG controller with dedicated DMA, on-chip full-speed PHY\u003cbr\u003e--1 x USB HS ULPI (external PHY required)\u003cbr\u003e- AD \u0026amp; DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)\u003cbr\u003e- Debugging\/Programming: supports JTAG\/SWD (serial wire debug) interfaces, supports IAP\u003cbr\u003e2. AMS1117-3.3: 3.3V voltage regulator\u003cbr\u003e3. MIC2075-2: onboard USB power management device\u003cbr\u003e4. Power supply switch, powered from 5Vin or USB connection\u003cbr\u003e5. Boot mode selection, for configuring BOOT0 pin\u003cbr\u003e6. Power indicator\u003cbr\u003e7. VBUS LED\u003cbr\u003e8. Reset button\u003cbr\u003e9. 8M crystal\u003cbr\u003e10. 32.768K crystal, for internal RTC with calibration\u003cbr\u003e11. JTAG\/SWD interface: for debugging\/programming\u003cbr\u003e12. USB connector, used for establishing USB communication between PC and the STM32 development board\u003cbr\u003e13. MCU pins expander, VCC, GND and all the I\/O pins are accessible on expansion connectors for further expansion\u003cbr\u003e14. 5Vin pinheader, 5V power supply is required when using USB HOST\/OTG\u003cbr\u003e15. USB jumper\u003cbr\u003e- Short the jumper when using USB\u003cbr\u003e- Open the jumper to disconnect from related I\/O port\u003cbr\u003e16. VBAT selection jumper\u003cbr\u003e- Short the jumper to use system power supply\u003cbr\u003e- Open the jumper to connect the VBAT to external power, such as battery\u003cbr\u003e\u003cbr\u003ePackage  Contents\u003cbr\u003e1. Core405R x 1\u003cbr\u003e2. USB type A to Mini-B cable x 1\u003cbr\u003e3. Software CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43061159723255,"sku":"ZY13991230","price":33.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/ZY13991230.jpg?v=1658930644"},{"product_id":"ssop8-ots-28-0-65-01-chip-adapter-socket","title":"SSOP8 OTS-28-0.65-01 Chip Adapter Socket","description":"\u003cbr\u003eFeatures:\u003cbr\u003e1. Using double contact technology, the contact is more stable;\u003cbr\u003e2. The seat shell is made of special engineering plastic, which has high strength and long life;\u003cbr\u003e3. The shrapnel adopts imported beryllium copper material, which has low impedance and good elasticity;\u003cbr\u003e4. Thick gold-plated layer, thick electroplating of contacts, ultra-low contact impedance and high reliability;\u003cbr\u003e\u003cbr\u003e Product performance:\u003cbr\u003e1. Material: insulator PEI, PPS; shrapnel, beryllium copper Be Cu Gold plating (30u), Over Nickel plating (50u)\u003cbr\u003e2. Insulation resistance: 1000mohm, At DC 500V\u003cbr\u003e3. Withstand voltage: 700AC\/1Minute\u003cbr\u003e4. Contact impedance: less than 25mohm\u003cbr\u003e5. PIN foot elasticity: 55g\/PIN(Normal)\u003cbr\u003e6. Working temperature: minus 65-155 degrees Celsius\u003cbr\u003e7. Specifications and dimensions: pin spacing: 0.65 mm, pin position: 8, adaptable chip body width: 4.4 mm\u003cbr\u003e\u003cbr\u003e","brand":"Buy2fix","offers":[{"title":"Default Title","offer_id":43061171290359,"sku":"TBD05541240","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/6734\/0535\/products\/TBD05541240.jpg?v=1658930912"}],"url":"https:\/\/buy2fix.co.uk\/en-au\/collections\/mcu-tools.oembed","provider":"Buy2fix","version":"1.0","type":"link"}