SATLINK WS6916 Digital Satellite Signal Finder Meter, 3.5 inch TFT LCD Screen, Support DVB-S / S2, MPEG-2 / MPEG-4(AU Plug)

SATLINK WS6916 is a digital satellite signal finder meter designed to measure signal strength and quality. It is suitable for satellite dish alignment and troubleshooting signal issues.

• Display: 3.5 inch TFT transmissive LCD screen
• Resolution: 480(RGB) x 272 pixels
• Active area: 70.02 x 52.58 mm
• Compliance: Fully DVB S/DVB S2, MPEG2/MPEG4 compliant
• Decoding: MPEG2 / H.264 hardware decoding
• Signal measurement: Digital meter for signal strength and quality
• Scanning modes: Auto, blind, manual, NIT
• Alarm: Sound and light alarm for locking signal
• Angle calculation: Auto calculate angle of AZ, EL
• DISEQC support: 1.0/1.1/1.2, 0/22KHz tone
• Speaker: Integrated speaker
• AV interfaces: Support both AV out and AV in
• LNB supply: 13V/18V, Max 400mA, LNB short protect
• Battery: 7.4V/3000mAh li-ion battery included
• Software upgrade: Via USB port
• Portability: Easy to carry
• Demodulation types: QPSK, 8PSK
• Symbol rate: 2 less than Rs less than 45M band (SCPC/MCPC)
• Input frequency: 950~2150MHz
• Signal input level: -65~ -25dBm
• Band switch control: 22KHz
• AV output/input interface: 3.5mm jack, CVBS video output/input, stereo audio L/R output/input
• Video resolution: PAL 25 frame at 720 x 576, NTSC 30 frame at 720 x 480
• Video format: 4:3, 16:9, pan & scan and letter box conversion
• Audio decompression: MPEG1 Layer I/II, MPEG2 Layer I/II
• Audio output modes: Stereo, Mono, R/L